Hollow nut separator
Hollow nut separator
hollow nut separator
- Sorting solid nuts / hollow nuts: 2500 to 3000 kg/h
- speed adjustable by electronic variator
- 400V three-phase 7.5kW
This highly efficient separator also has the advantage of being very compact and can be positioned
Shaker
Shaker
Hydraulic tree shaker:
- Drive by hydraulic unit
- Clamp opening: 700 mm
- Height of the trunk: from 20cm to 2m
- 3-point hitch
- Mini tractor power: 55 hp
Dimensions
Width: 1,65 m
Length: 2,7 m
This model can be installed at
Drying tower
Drying tower
Drying towers optimise the drying cost by using warm air that is not fully loaded with moisture to dry the upper floors.
The optimisation must be done by adapting the generator to the size of the tower and
Sorting table
Sorting table
Our sorting tables are made of galvanised steel with a standard width of 50cm
The usual lengths are 2m, 2.50m and 3m
Any other length or width can be made on request
Available options:
- Sorting table made from
Separator S7500
Separator S7500UT
A feed hopper
This separator is provided with a buffer feed hopper with electromagnetic vibrator which allows a regular feeding and optimizes the operation of the vibrator
- Sorting of full walnuts / hollow walnuts : 3 to 4
Separator S550
Separator S550
Hollow walnut / shell kernel separator:
Used on dry walnuts or after breaking to separate shells from kernels
- Sorting full walnuts / hollow walnuts : 500 to 800 kg/h
- Sorting kernels / shells : 250 kg/h
- adjustable speed
Séparator S3000
Séparator S3000
FRESH NUT SEPARATOR
Designed to be positioned at the washer outlet, it can also separate dry nuts or hazelnuts thanks to the accurate adjustment of the variator.
It is also suitable for chestnuts to remove all the
Separator by suction
Separator by suction
Kernels and shells separator by suction:
This separator allows a finer adjustment than a simple column separator with a double suction on two grid drums
- Flow rate: 200 to 400 kg/h
- Suction and product advancement speed adjustable
OIL PRESS
OIL PRESS
Several models with powers of 70, 90 or 200 tons.
Specifications of the 90 ton model
- Cylinder thrust force: 90T
- 27 litre basket, i.e. approx. 17 kg of crushed kernels
GRINDER
Grinder
- Stainless steel wheel filled with concrete, width 400 mm, diameter 900 mm
- Capacity approx. 20 kg of crushed kernels per cycle
- Cycle time 15 to 20 minutes
- Automatic product centring system under the grinding wheel
- Motor power : 3
